This is a new pop-up window on top of your GeneratorJoe browser window.  CLICK TO CLOSE WINDOW

ASCO Optional Accessories - Series 300

Deluxe Engine Exerciser Strip Heater Kit Surge Suppressor Pulsar 450 Communications Interface Module Accessory 72A Serial Interface Module Cover Box Audible Alarm
Deluxe Engine Exerciser
Accessory 11BG
Strip Heater Kit
Accessory 44G
Surge Suppressor
Pulsar 450
Communications Interface
Module Accessory 72A
Serial Interface Module Cover Box Audible Alarm
Order K629830 Order K613127-002 Order Pulsar 450 Order 72A Order 72A or 72E Order 123 Order 62W
     
Accessory 11BG (shown above)
A programmable engine exerciser that provides for weekly or biweekly operation, includes one form C contact for source availability of normal and emergency (contact rating 2 amps @ 30Vdc, 0.5 amp. @ 125 VAC resistive). The programmable engine exerciser incorporates a 7 day or 14 day time base with a digital readout display. Includes "with or without" load control switch for exerciser period.
 
Accessory 14AA/BA (not pictured)
Auxiliary contacts to indicate position of main contacts. Two (2) for normal and two (2) for emergency position (one set is standard).
.
Accessory 44A (not pictured)
Strip Heater with thermostat for extremely cold areas to prevent condensation and freezing of this condensation. External 120 volt power source required.
 
Accessory 40B (not pictured)
Normal and Emergency terminals reversed.
 
Accessory 44G (shown above)
Strip Heater with thermostat, wired to load terminals: 208-240, 360-380, 460-480, 550-600 volts. Contains wiring harnesses for all transfer switch sizes.
 
Accessory 72A (shown above)
Communications Interface Module (RS-485) to allow local or remote communications with ASCO PowerQuest® VPi or SiteWebTM communications products
 
Accessory 72E (shown above)
Connectivity Module 5150 is used to bring several different serial devices that communicate at different baud rates and with different protocols to a common Ethernet media.
 
ASCO Pulsar® 450 High-Performance Surge Suppressor (shown above)
The ASCO Pulsar® 450 provides unparalleled protection from power surges and transients. It is a high-performance surge suppressor which limits large surges and transients through a unique array of computer-matched metal oxide varistors (MOVs). Unique four-cavity sand packed UL94-5 volt rated housing, UL 1449, UL 1283, and CSA listed. Available as a separate item for mounting and installation by the customer. Contact ASCO for ordering information.
Accessory 123
A protective window that includes a polycarbonate frame and weather gasket to provide secure access to the membrane interface for the Type 1 Enclosures. This lockable cover is an alternative to providing 3R secure enclosures.
 
Accessory 62W Audible Alarm with Silence Feature
For City of Chicago Code Requirement - audible alarm with silencing feature to signal each time transfer to emergency occurs. Keyed test switch/retransfer delay bypass, momentary in both directions. Keyed test switch maintained transfer to emergency. Includes feature 9C, signal light (PL3 - Green) indicates normal source available, and 9D, signal light (PL4 - Red) indicates emergency source available.

Copyright © 1996-2019 GeneratorJoe Inc. & GeneratorJoe®. All Rights Reserved. -  © Copyright 1996-2016 ASCO Power Technologies

This is a new pop-up window on top of your GeneratorJoe browser window.  CLICK TO CLOSE WINDOW